JI-USFM-F2 is with Compact Design, which allows fast installation and convenient flow measurement. The flow meter comprises of 2 flow measurement sensors, clamps, and Central Processing Unit for flow metering. Non-invasive installation available, the sensors are installed outside the pipe. Easy to install and will not interrupt the manufacturing process. No pressure drop, low maintenance cost.
The Flowmeter F2 shall be installed in water lines in the direction of the flow.
1) CLAMP THE PIPE STRAPS
2) TIGHTEN THE SCREWS
3) INSTALL THE METER
4) FINISH AND POWER ON
Optional Outputs: WiFi | TTL/RS485 | 4-20 mA
Supporting Protocol: Modbus | Fuji
Application: Water treatment and distribution, pharmaceutical, inland aquaculture, heating and cooling circuits, swimming pools and irrigation systems, fire-fighting installations, automotive industry and energy plant.
Flow Range: 0.03m/s~±5m/s (0.1 ft/s ~ ±16ft/s) Accuracy: ± 2.0% Repeatability: 0.8% Display: LCD1.44” Keyboard: 3 touch keys Protection Rate: IP54 Housing Enclosure: ABS+PC Material Power supply: 10~36VDC, 500mA Transducer (Flow senor): Clamp-on type Operating Temperature: 0℃~60℃ (32℉~140℉) Cable: 2m (7ft) Length
Ultrasonic Flow meter JI-USFM-F2
Registered Office: Kesar Niwas 2nd Floor, 40 Picket Road, Kalbadevi, Mumbai 400002, India
Copyright © 2022 Japsin Instrumentation - All Rights Reserved.